| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
UPD70732 bảng dữ liệu(PDF) 47 Page - NEC |
|
|
|||||||||||||||||||||||||||||
UPD70732 bảng dữ liệu(HTML) 47 Page - NEC |
|
47 / 66 page ![]() 47 µPD70732 10.2 Specifications When VDD = 2.7 to 3.6 V Absolute Maximum Ratings (TA = 25˚C) Parameter Symbol Test Conditions Rating Unit Supply voltage VDD –0.5 to +7.0 V Input voltage VI VDD = 2.7 to 3.6 V –0.5 to VDD + 0.3 V Clock Input voltage VK VDD = 2.7 to 3.6 V –0.5 to VDD + 0.3 V Output voltage VO VDD = 2.7 to 3.6 V –0.5 to VDD + 0.3 V Operaitng ambient temperature TA –40 to +85 ˚C Storage temperature Tstg –65 to +150 ˚C Cautions 1. Do not directly interconnect IC product output (or input/output) pins, or directly connect VDD or VCC to GND. However, open-drain pins and open-collector pins can be interconnected. Direct connection is also possible for an external circuit using timing design that avoids output collision with a pin that becomes high-impedance. 2. Product quality may suffer if the absolute maximum rating is exceeded for even a single parameter, or even momentarily. In other words, the absolute maximum ratings are rated values at which the product is on the verge of suffering physical damage, and therefore, the product must be used under conditions which ensure that the absolute maximum ratings are not exceeded. As far as possible, the product should be used in a state in which the rated value is not approached. The ratings and test conditions shown in the DC characteristics and AC characteristics are the normal operation and quality assurance ranges of the product. DC Characteristics (TA = –40 to +85˚C, VDD = 2.7 to 3.6 V) Parameter Symbol Test Conditions MIN. TYP. MAX. Unit Clock input voltage, high VKH 0.8 VDD VDD + 0.3 V Clock input voltage, low VKL –0.5 +0.2 VDD V Input voltage, high VIH 2.0 VDD + 0.3 V Input voltage, low VIL –0.5 +0.6 V Output voltage, high VOH IOH = –2.0 mA 0.85 VDD V IOH = –100 µAVDD – 0.2 V Output voltage, low VOL IOL = 3.2 mA 0.4 V Input leak current, high ILIH VIN = VDD 5 µA Input leak current, low ILIL VIN = 0 V –5 µA Output leak current, high ILOH VO = VDD 5 µA Output leak current, low ILOL VO = 0 V –5 µA Supply current IDD f = 16 MHz 38Note 2 100 mA Stopping clockNote 1 330 µA Notes 1. VIL = 0 V, VIH = VDD applied 2. In general benchmark test (Output pins are open.) Remark Operating supply current is approximately proportional to operating clock frequency. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |