AN2752 datasheet(23/40 Pages) STMICROELECTRONICS

23 / 40 page

AN2752

STM8 development tools

Doc ID 14651 Rev 5

23/40

Figure 14.

STice in emulation configuration

8.2.3

In-circuit programming and debugging

In the in-circuit debugging/programming configuration, STice allows the application to be

programmed in the microcontroller and for the application to be debugged while it runs on

the microcontroller on the application board. STice supports the SWIM protocol, making it

possible to in-circuit program and debug the microcontroller using only one general purpose

I/O.

In both the emulation and the in-circuit programming/debugging configuration, STice is

driven by the ST visual develop (STVD) or ST visual programmer (STVP) integrated

development environment running on the host PC. This provides total control of advanced

application building, debugging and programming features from a single easy-to-use

interface.

Free ST/STM8 toolset: STVD and STVP running on your PCdrive STice

STice-SYSxxx: Includes all emulation resources, MEB, TEB,

and PEB

CF/FPxxx: Connection flex to connect to application board

AD/xxxx: Connection

adapter to link connection

cable to microcontroller

AS/xxxx: Adapter socket on application

board to plug in emulator in place of

microcontroller

AN2752 bảng dữ liệu(PDF) 23 Page - STMicroelectronics