AN2169 datasheet(23/33 Pages) STMICROELECTRONICS

23 / 33 page

AN2169

New registers

23/33

New registers

This section presents new registers that have to be considered when porting an application

running on the ST10F168 onto the ST10F276.

4.1

XPERCON register

The ST10F276 has a new register named XPERCON that allows the XBUS peripherals to be

separately selected for being visible to the user by means of corresponding bits. If not selected

(not activated with a bit of XPERCON) before the XPEN bit in SYSCON is set, the

corresponding address space, port pins and interrupts are not occupied by the peripheral, and

thus this peripheral is not visible and not available.

ST10F276: XPERCON (F024h / 12h)

SFR

Reset Value: -005h

XMISC

XI2C

XSSC

XASC

XPWM

XFLASH

RTC

XRAM2

XRAM1

CAN2

CAN1

Bit

Function

15:11

Reserved

XMISCEN: XBUS Additional Features Enable Bit

0: Accesses to the Additional Miscellaneous Features is disabled.

1: The Additional Features are enabled and can be accessed.

XI2CEN: XI 2 C Enable Bit

0: Accesses to the on-chip XI 2 C are disabled, external access performed.

1: The on-chip XI 2 C is enabled and can be accessed.

XSSCEN: XSSC Enable Bit

0: Accesses to the on-chip XSSC are disabled, external access performed.

1: The on-chip XSSC is enabled and can be accessed.

XASCEN: XASC Enable Bit

0: Accesses to the on-chip XASC are disabled, external access performed.

1: The on-chip XASC is enabled and can be accessed.

XPWMEN: XPWM Enable

0: Accesses to the on-chip XPWM module are disabled, external access performed.

1: The on-chip XPWM module is enabled and can be accessed.

XXFLASHEN: FLASH Enable Bit

0: Accesses to the on-chip XFLASH are disabled, external access performed.

1: The on-chip XFLASH is enabled and can be accessed.

AN2169 bảng dữ liệu(PDF) 23 Page - STMicroelectronics

AN2169 bảng dữ liệu(HTML) 23 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

bảng dữ liệu tải về

Link URL