AN1603 datasheet(11/21 Pages) STMICROELECTRONICS

11 / 21 page

11/21

USING THE ST7 USB DEVICE FIRMWARE UPGRADE DEVELOPMENT KIT (DFU-DK)

4.3.8 STDFU_GetNbOfAlternates

4.3.8.1 Prototype

DWORD STDFU_GetNbOfAlternates(

DWORD Num,

UINT nConfigIdx,

UINT nInterfaceIdx,

PUINT pNbOfAltSets);

4.3.8.2 Description

Gets Alternate Settings Number.

4.3.8.3 Parameters

Num: Number of the selected DFU Device (Given by STDFU_EnumGetNbDevices)

nConfigIdx: Number of the selected Configuration

nInterfaceIdx : Number of the selected Interface

pNbOfAltSets: pointer to Alternate Settings Number

4.3.8.4 Returned value

STDFU_NOERROR in case of success, otherwise (Error Code).

4.3.9 STDFU_GetInterfaceDescriptor

4.3.9.1 Prototype

DWORD STDFU_GetInterfaceDescriptor(

DWORD Num,

UINT nConfigIdx,

UINT nInterfaceIdx,

UINT nAltSetIdx,

PUSB_INTERFACE_DESCRIPTOR pDesc);

4.3.9.2 Description

Gets the interface descriptor.

4.3.9.3 Parameters

Num: Number of the selected DFU Device (Given by STDFU_EnumGetNbDevices)

nConfigIdx: Number of the selected Configuration

nInterfaceIdx: Number of the selected Interface

nAltSetIdx: Number of the selected Alternate Setting

pDesc: buffer the descriptor will be copied to.

4.3.9.4 Returned value

STDFU_NOERROR in case of success, otherwise (Error Code).

AN1603 bảng dữ liệu(PDF) 11 Page - STMicroelectronics