5 HARDWARE IMPLEMENTATION

The binary executable code generated during the analyse process is simply programmed into

an EPROM or OTP MCU device to validate the application in the real world. By using a

ST62E25 mounted on an ST62 Starter-kit, it has been checked that:

By turning the potentiometer to the right or to the left, the appropriate output to one of the two

connected LEDs oscillates with a frequency increasing with the potentiometer rotation.

The frequency evolution is not linear with the potentiometer rotation according to the desired

response transformation.

When a reset is performed with the potentiometer slightly uncentered, any oscillation is

turned-off due to the autozero process.

12/14