| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
UM0723 bảng dữ liệu(PDF) 44 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
UM0723 bảng dữ liệu(HTML) 44 Page - STMicroelectronics |
|
44 / 48 page ![]() Ordering information UM0723 44/48 Doc ID 15870 Rev 4 9 Ordering information The demonstration board is orderable through the standard ordering system, the ordering code is: STEVAL-IHM023V2. The items delivered include the assembled demonstration board, board documentation, PCB fabrication data such as gerber files, assembly files (pick and place), and component documentation. 10 Using STEVAL-IHM023V2 with STM32 PMSM FOC firmware library v3.0 The “STM32 PMSM FOC firmware library v3.0” is part of the STM32 PMSM single/dual FOC SDK v3.0. In particular, it is a firmware library running on any STM32F103x and STM32F100x device which implements the “Field Oriented Control” (FOC) drive of three- phase “Permanent Magnet Synchronous Motors” (PMSM), both “Surface Mounted” (SM- PMSM) and “Internal” (I-PMSM). This section describes how to customize the firmware library by making use of the PC tool “ST MC Workbench” (STMCWB) downloadable from www.st.com. 10.1 Environmental considerations Warning: The STEVAL-IHM023V2 demonstration board must only be used in a power laboratory. The voltage used in the drive system presents a shock hazard. The kit is not electrically isolated from the DC input. This topology is very common in motor drives. The microprocessor is grounded by the integrated ground of the DC bus. The microprocessor and associated circuitry are hot and MUST be isolated from user controls and communication interfaces. Warning: All measuring equipment must be isolated from the main power supply before powering up the motor drive. To use an oscilloscope with the kit, it is safer to isolate the DC supply AND the oscilloscope. This prevents a shock occurring as a result of touching any SINGLE point in the circuit, but does NOT prevent shocks when touching two or more points in the circuit. An isolated AC power supply can be constructed using an isolation transformer and a variable transformer. Note: Isolating the application rather than the oscilloscope is highly recommended in any case. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |