UPD17717GC datasheet(85/408 Pages) NEC

tên linh kiện	UPD17717GC

Giải thích chi tiết về linh kiện	4-BIT SINGLE-CHIP MICROCONTROLLERS WITH DEDICATED HARDWARE FOR DIGITAL TUNING SYSTEM

PDF	408 Pages

Scroll/Zoom	100%

nhà sản xuất	NEC [NEC]

Trang chủ	http://www.nec.com/

Logo

85 / 408 page

µPD17717, 17718, 17719

9.2.2 Table reference instruction (“MOVT DBF, @AR”)

This instruction moves the contents of the program memory addressed by the contents of the address register

to the data buffer.

The number of bits transferred by the table reference instruction can be specified by MOVT selection register

(address 07H) of the control registers.

When 8-bit data is transferred, it is read to DBF1 and 0.

When the table reference instruction is used, one stack level is used.

All the addresses of the program memory can be referenced by the table reference instruction.

9.2.3 Peripheral hardware control instructions (“PUT” and “GET”)

The operations of the “PUT” and “GET” instructions are as follows:

(1) GET DBF, p

Reads the data of a peripheral register addressed by “p” to the data buffer.

(2) PUT p, DBF

Sets the data of the data buffer to a peripheral register addressed by “p”.

9.3 Relationships between Peripheral Hardware and Data Buffer

Table 9-1 shows the relationships between the peripheral hardware and the data buffer.

UPD17717GC bảng dữ liệu(PDF) 85 Page - NEC