| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
UM1811 bảng dữ liệu(PDF) 44 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
UM1811 bảng dữ liệu(HTML) 44 Page - STMicroelectronics |
|
44 / 52 page ![]() Basic G3 operations UM1811 44/52 DocID026814 Rev 1 Figure 32. Configure Node 1 in TX For the Node 2, as shown in Figure 32, go into the PHY menu / PLME_Control panel (1) to configure the state of the node. Check the TXOFF_RXON (2) parameter and click on the PLME_SET_TRX_STATE.Request button (3). Figure 33. Configure Node 2 in RX Now that the boards are plugged in the mains and the setup has been completed, data can be sent at the PHY level, as represented in Figure 33. To do this, go to the PHY root menu of the Node 1. Select the payload type to be ASCII (1), write the “TEST” string in the free text area (2) and click on the PD_DATA.Request button (3). In the trace window, it is possible to check that the Node 2 has received the data message by checking that the PD_DATA.Indication message returned the SUCCESS status. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |