Battery Recharge Rate (Included

Batteries)

6 hours from 10% to 90% (typical, full load discharge)

Internal UPS Replacement Battery

Cartridge

RBC5-192 (qty 1)

Battery Access

Front panel battery access door

Battery Replacement Description

Hot-swappable, user replaceable batteries

VOLTAGE REGULATION

Voltage Regulation Description

Online, double-conversion power conditioning

Overvoltage Correction

2% output voltage regulation during overvoltages to 280V (full load) / 300V (90% load or less)

Undervoltage Correction

2% output voltage regulation during undervoltages to 156V (full load) / 100V (50% load or less)

USER INTERFACE, ALERTS & CONTROLS

Front Panel LCD Display

Selectable LCD display with scroll and selection buttons enables UPS control and detailed monitoring options;

LED/LCD panel rotates for viewing in rack/tower formats (see manual)

Switches

2 Switches control off/on power status and alarm-cancel/self-test operation; 2 additional switches support set and

execute scrolling LCD functions; A manual bypass switch featured on the detachable PDU allows for complete

removal of the UPS during routine maintenance without disrupting power to connected loads

Alarm Cancel Operation

Alarm cancel switch

Audible Alarm

Unique audible alarms for all major UPS, environmental and power conditions (see manual)

LED Indicators

6 LEDs indicate line power, online mode, economy/bypass mode, on-battery, charger and AC output status; LCD

screen offers additional information and control options

SURGE / NOISE SUPPRESSION

UPS AC Suppression Response

Time

Instantaneous

EMI / RFI AC Noise Suppression

Yes

PHYSICAL

Included Mounting Accessory

Description

2 sets of adjustable 4 post rack rails included

Installation Form Factors Supported

with Optional Accessories

2 post rackmount (2POSTRMKITHD); Tower (2-9USTAND)

Optional Mounting Accessory Notes

2 sets of 2POSTRMKITHD required for 2 post rackmount installation of separate 4U power module and 2U

transformer

Primary Form Factor

Rackmount

UPS Power Module Dimensions

(hwd, in.)

6.85 x 17.5 x 20.7

UPS Power Module Dimensions

(hwd, cm)

17.4 x 44.5 x 52.6

Installed Whole System Maximum

Rack Depth (in.)

20.75

4 / 6