| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
80960SA bảng dữ liệu(PDF) 18 Page - Intel Corporation |
|
|
|||||||||||||||||||||||||||||
80960SA bảng dữ liệu(HTML) 18 Page - Intel Corporation |
|
18 / 39 page ![]() 14 80960SA 2.6 ABSOLUTE MAXIMUM RATINGS* Parameter Maximum Rating Operating Temperature (PLCC) ........... 0°C to +85°C Case Operating Temperature (QFP) ............ 0°C to +100°C Case Storage Temperature .............................. –65°C to +150°C Voltage on Any Pin (PLCC)................. –0.5V to VCC +0.5V Voltage on Any Pin (QFP)............... –0.25V to VCC +0.25V Power Dissipation ....................................... 1.9W (20 MHz) NOTICE: This is a production data sheet. The specifications are subject to change without notice. *WARNING: Stressing the device beyond the “Absolute Maximum Ratings” may cause permanent damage. These are stress ratings only. Operation beyond the “Operating Conditions” is not recommended and extended exposure beyond the “Operating Conditions” may affect device reliability. 2.7 DC Characteristics 80960SA (10 and 16 MHz QFP) TCASE = 0°C to +100°C, VCC = 5V ± 5% 80960SA (10 and 16 MHz PLCC) TCASE = 0°C to +85°C, VCC = 5V ± 10% 80960SA (20 MHz PLCC) TCASE = 0°C to +85°C, VCC = 5V ± 5% Table 5. DC Characteristics Symbol Parameter Min Max Units Notes VIL Input Low Voltage –0.3 +0.8 V VIH Input High Voltage 2.0 VCC + 0.3 V VCL CLK2 Input Low Voltage –0.3 +0.8 V VCH CLK2 Input High Voltage 0.7 VCC VCC + 0.3 V VOL Output Low Voltage 0.45 0.45 V V IOL = 4.0 mA IOL = 6 mA, LOCK Pin VOH Output High Voltage 2.4 V All TS, -2.5 mA (1) ICC Power Supply Current: 10 MHz-QFP 10 MHz-PLCC 16 MHz-PLCC 20 MHz-PLCC 240 240 300 340 mA mA mA mA TCASE = 00C TCASE = 00C TCASE = 00C TCASE = 00C ILI1 Input Leakage Current, Except INT0, LOCK ±15 µA 0 ≤ V IN ≤ VCC ILI2 Input Leakage Current, INT0, LOCK –300 µA VIN = 0.45V (2) IOL Output Leakage Current ±15 µA CIN Input Capacitance 10 pF fC = 1 MHz (3) CO Output Capacitance 12 pF fC = 1 MHz (3) CCLK Clock Capacitance 10 pF fC = 1 MHz (3) NOTES: 1. Not measured for open-drain output. 2. INT0 and LOCK have internal pullup devices. 3. Input, output and clock capacitance are not tested. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |