HT815D0 datasheet(10/15 Pages) HOLTEK

10 / 15 page

HT815D0

March 15, 2000

Voice indicator output

FLAG1 is active low when voices are play-

ing. FLAG1 is also turned low when a voice

section is output. The brightness of FLAG1

varies with the volume. FLAG1 becomes a

floating output after the silence section is

output or the voice output is terminated.

End-pulse output

When the voice output is completed, the

FLAG1 pin outputs an active low pulse. The

pulse width can be programmed depending

on the customer¢s requirements.

The FLAG1 and FLAG2 pins are both float-

ing outputs when the chip is in the standby

state.

Volume control

The function of volume control can be set by

mask option. A code is written in the function

table for the purpose of controlling the volume

of each section output after the volume control

function is chosen. There are two volume op-

tions, namely, full range and half range.

AUD

The AUD pin is a PMOS open drain structure.

It outputs voice signals to drive a speaker

through an external NPN transistor when the

chip is active. However, the AUD pin becomes

floating when the chip is in the standby state.

The 8050 type transistor with hFE@150 is rec-

ommended for an output driver.

AU D

FL A G

: F l oat i n g

AU D

FL A G

: F l oat i n g

VD D

OS C 2

OS C 1

VSS

AU D

R OS C

H T 815D 0

805 0

V DD

SP K

HT815D0 bảng dữ liệu(PDF) 10 Page - Holtek Semiconductor Inc

HT815D0 bảng dữ liệu(HTML) 10 Page - Holtek Semiconductor Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

bảng dữ liệu tải về

Link URL