Supports Tripp Lite's Watchdog system service to restore operation to locked equipment through soft reboot of application/OS or hard power off/on reboot

of connected equipment; ideal for unattended kiosk applications

Hot-swappable user battery replacement supported via battery access door

Optional PDUB15 bypass PDU enables hot-swappable UPS replacement with no disruption to connected equipment

Space-saving, ultra-compact housing fits almost anywhere

Keyhole mounting flanges enable secure wallmount installation

Specifications

OUTPUT

Output Volt Amp Capacity (VA)

750

Output Watt Capacity (watts)

450

Nominal Output Voltage(s)

Supported

115V; 120V

Frequency compatibility

60 Hz

Output voltage regulation (line mode)

+8%, -21%

Output voltage regulation (Battery

mode)

115V (+/- 5%)

Built-in UPS output receptacles

12 5-15R outlet(s)

Surge suppression only outlets

6 UPS outlets, 6 surge-only outlets

Hot-Swap PDU options

PDUB15 (2U / 8 5-15R outlets)

Output AC waveform (AC mode)

Sine wave

Output AC waveform (battery mode)

PWM sine wave

INPUT

Rated input current (at maximum

load)

12A

Nominal Input Voltage(s) Supported

120V AC

UPS input connection type

5-15P

UPS Input cord length (ft.)

6

UPS Input cord length (m)

1.8

Recommended Electrical Service

15A 120V

Phase

Single-Phase

BATTERY

Full load runtime (minutes)

4 min. (450w)

Half load runtime (minutes)

10 min. (225w)

DC system voltage (VDC)

12

2 / 5