LM3302DR datasheet(2/12 Pages) TI1

2 / 12 page

LM3302

QUADRUPLE DIFFERENTIAL COMPARATOR

SLCS014A −OCTOBER 1977 −REVISED AUGUST 2003

POST OFFICE BOX 655303

• DALLAS, TEXAS 75265

schematic

80-

µA Current

Regulator

µA

IN+

GND

OUT

VCC

µA

Current values shown are nominal.

IN−

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†

Supply voltage, VCC (see Note 1)

28 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Differential input voltage, VID (see Note 2)

±28 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input voltage range, VI (either input)

−0.3 V to 28 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Output voltage, VO

28 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Output current, IO

20 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Duration of output short-circuit to ground (see Note 3)

Unlimited

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

θJA (see Notes 4 and 5): D package

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

N package

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operating virtual junction temperature, TJ

150

°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D or N package

260

°C

. . . . . . . . . . . . . . . .

Storage temperature range, Tstg

−65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. There are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated in the recommended operating conditions section of this

specification is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. All voltage values, except differential voltages, are with respect to the network ground.

2. Differential voltages are at IN+ with respect to IN−.

3. Short circuits from the output to VCC can cause excessive heating and eventual destruction.

4. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable

ambient temperature is PD = (TJ(max) − TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.

5. The package thermal impedance is calculated in accordance with JESD 51-7.

LM3302DR bảng dữ liệu(PDF) 2 Page - Texas Instruments

LM3302DR bảng dữ liệu(HTML) 2 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

bảng dữ liệu tải về

Link URL