PM8803

Electrical specifications

Doc ID 018559 Rev 2

17/34

Note:

1

Minimum and maximum limits are guaranteed by test, design, or statistical correlation.Typical values

2

Device thermal limitations could limit useful operating range.

3

The VC regulator is intended for internal use only as the startup supply of the PM8803; any additional

external VC current, including the VB regulator current and external MOSFET driving current, has to

be limited within the specified max current limit.

Minimum VDD voltage for

rear aux. operations

13

15

V

T2P flag

T2P pull-up current

20

25

30

μA

T2P pull-down resistance

45

75

Ω

Device current consumption

VD quiescent current

1.25

1.5

mA

VC quiescent current

2

2.5

mA

Table 6.

Electrical characteristics - SMPS section (continued)

Symbol

Parameter

Test conditions

Min.

Typ.

Max.

Unit