công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

LMK04800 bảng dữ liệu(PDF) 21 Page - National Semiconductor (TI)

[Old version datasheet] Texas Instruments acquired National semiconductor.
tên linh kiện LMK04800
Giải thích chi tiết về linh kiện  Low-Noise Clock Jitter Cleaner with Dual Loop PLLs
PDF  79 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
nhà sản xuất  NSC [National Semiconductor (TI)]
Trang chủ  http://www.national.com
Logo NSC - National Semiconductor (TI)

LMK04800 bảng dữ liệu(HTML) 21 Page - National Semiconductor (TI)

Back Button LMK04800 Datasheet HTML 17Page - National Semiconductor (TI) LMK04800 Datasheet HTML 18Page - National Semiconductor (TI) LMK04800 Datasheet HTML 19Page - National Semiconductor (TI) LMK04800 Datasheet HTML 20Page - National Semiconductor (TI) LMK04800 Datasheet HTML 21Page - National Semiconductor (TI) LMK04800 Datasheet HTML 22Page - National Semiconductor (TI) LMK04800 Datasheet HTML 23Page - National Semiconductor (TI) LMK04800 Datasheet HTML 24Page - National Semiconductor (TI) LMK04800 Datasheet HTML 25Page - National Semiconductor (TI) Next Button
Zoom Inzoom in Zoom Outzoom out
 21 / 79 page
background image
L M K 0 4 8 X X
E V A L U A T I O N
B O A R D
O P E R A T I N G
I N S T R U C T I O N S
21
Recommended Test Equipment
Power Supply
The Power Supply should be a low noise power supply, particularly when the devices on the
board are being directly powered (onboard LDO regulators bypassed).
Phase Noise / Spectrum Analyzer
To measure phase noise and RMS jitter, an Agilent E5052 Signal Source Analyzer is
recommended. An Agilent E4445A PSA Spectrum Analyzer with the Phase Noise option is also
usable although the architecture of the E5052 is superior for phase noise measurements. At
frequencies less than 100 MHz the local oscillator noise of the E4445A is too high and
measurements will reflect the E4445A‟s internal local oscillator performance, not the device
under test.
Oscilloscope
To measure the output clocks for AC performance, such as rise time or fall time, propagation
delay, or skew, it is suggested to use a real-time oscilloscope with at least 1 GHz analog input
bandwidth (2.5+ GHz recommended) with 50 ohm inputs and 10+ Gsps sample rate. To
evaluate clock synchronization or phase alignment between multiple clock outputs, it‟s
recommended to use phase-matched, 50-ohm cables to minimize external sources of skew or
other errors/distortion that may be introduced if using oscilloscope probes.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79


bảng dữ liệu tải về

Go To PDF Page


Link URL



Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không?  [ DONATE ] 

Alldatasheet là   |   Quảng cáo   |   Liên lạc với chúng tôi   |   Chính sách bảo mật   |   Liên kết đến bảng dữ liệu    |   Trao đổi link   |   Tìm kiếm theo nhà sản xuất
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com