2

High Frequency Relay

G6K-RF

■ Coil Ratings

Note: 1. The rated current and coil resistance are measured at a coil temperature of 23

°C with a tolerance of ±10%.

2. The operating characteristics are measured at a coil temperature of 23

°C.

3. The maximum voltage is the highest voltage that can be imposed on the Relay coil instantaneously.

■ High Frequency Characteristics

Note: 1. The impedance of the measurement system is 50

Ω.

2. The above values are initial

3. These values are for a load with V.S.W.R.

4. Contact Omron if the relay will be used in an application that requires high repeatability in high-frequency characteristics for the microload

region. (Such applications include Test and Measurement equipment and ATE applications.)

■ Characteristics

Note: 1. The above values are initial values.

2. The contact resistance was measured with 10 mA at 1 VDC with a voltage drop method.

3. Values in parentheses are typical values.

4. The insulation resistance was measured with a 500-VDC megohmmeter applied to the same parts as those used for checking the dielectric strength.

Rated voltage

Rated current

Coil resistance

Must operate

voltage

Must release

voltage

Maximum voltage

Rated power

consumption

3 VDC

33.0 mA

91

Ω

80% max. of rated

voltage

(75% max. of rated

set voltage for

latching models)

10% min. of rated

voltage

(75% max. of rated

reset voltage for

latching models)

150% of rated voltage Approx. 100 mW

4.5 VDC

23.2 mA

194

Ω

5 VDC

21.1 mA

237

Ω

12 VDC

9.1 mA

1,315

Ω

24 VDC

4.6 mA

5,220

Ω

1 GHz, all models

3 GHz, “-T” models

Isolation

between contacts of

the same pole

20 dB min.

18 dB min.

between contacts of

different poles

30 dB min.

25 dB min.

Insertion loss

0.2 dB max.

0.6 dB max.

V.S.W.R.

1.2 max.

1.4 max.

Maximum transmission capacity

3 W (See note 3)

Maximum switching capacity

1 W (See note 3)

Item

Single-side stable models

Single-winding latching models

G6K-2F-RF(-S)(-T)

G6KU-2F-RF(-S)(-T)

Contact resistance (See note 2.)

100 m

Ω max.

Operating (set) time (See note 3.)

3 ms max. (approx. 1.4 ms)

3 ms max. (approx. 1.2 ms)

Release (reset) time (See note 3.)

3 ms max. (approx. 1.3 ms)

3 ms max. (approx. 1.2 ms)

Minimum set/reset pulse time

---

10 ms

Insulation resistance (See note 4.)

1,000 M

Ω min. (at 500 VDC)

Dielectric strength

Between coil and

contacts

750 VAC, 50/60 Hz for 1 min

Between contacts of

different poles

750 VAC, 50/60 Hz for 1 min

Between contacts of the

same pole

750 VAC, 50/60 Hz for 1 min

Between ground and

coil/contacts

500 VAC, 50/60 Hz for 1 min

Vibration resistance

Destruction

Malfunction

Shock resistance

Destruction

Malfunction

Endurance

Mechanical

50,000,000 operations min. (at a switching frequency of 36,000 operations/hour)

Electrical

100,000 operations min. (at a switching frequency of 1,800 operations/hour)

Ambient operating temperature

Operating:

−40°Cto70°C (with no icing or condensation)

Ambient operating humidity

Operating: 5% to 85%

Weight

Approx. 0.95 g