DS2176 datasheet(5/15 Pages) DALLAS

tên linh kiện	DS2176

Giải thích chi tiết về linh kiện	T1 Receive Buffer

PDF	15 Pages

Scroll/Zoom	100%

nhà sản xuất	DALLAS [Dallas Semiconductor]

Trang chủ	https://www.maximintegrated.com/en.html

Logo

5 / 15 page

DS2176

5 of 15

passed through the receive buffer and presented at SSER immediately after the rising edge of the system

side frame sync. The F–bit is dropped in 2.048 MHz applications and the MSB of channel 1 appears at

SSER one bit period after a rising edge at SFSYNC. SSER is forced to 1 in all channels greater than 24.

See Figures 3 and 4.

In 2.048 MHz applications (SCLKSEL=1), the PCM buffer control logic establishes slip criteria different

from that used in 1.544 MHz applications to compensate for the faster system-side read frequency.

PARALLEL COMPATIBILITY

The DS2176 is compatible with parallel and serial back-planes. Channel 1 data appears at SSER after a

rising edge at SFSYNC as shown in Figures 3 and 4 (serial applications, S/ P =1). The device utilizes a

look–ahead circuit in parallel applications (S/ P =0). Data is output 8 clocks earlier, allowing the user to

convert parallel data eternally.

SYSTEM MULTIFRAME BOUNDARY TIMING (SYSCLK = 1.544 MHz) Figure 3

DS2176 bảng dữ liệu(PDF) 5 Page - Dallas Semiconductor