1658012-2 datasheet(2/24 Pages) MACOM

2 / 24 page

Catalog 65194

Dimensions are in millimeters

Dimensions are shown for

USA: 1-800-522-6752

South America: 55-11-2103-6000

Revised 6-07

and inches unless otherwise

reference purposes only.

Canada: 1-905-470-4425

Hong Kong: 852-2735-1628

specified. Values in brackets

Specifications subject

Mexico: 01-800-733-8926

Japan: 81-44-844-8013

www.tycoelectronics.com

are standard equivalents.

to change.

C. America: 52-55-1106-0803

UK: 44-8706-080-208

High Speed Fine Pitch Connectors

(MICTOR, MICTOR SB, Micro-Strip and STEP-Z

Interconnection Systems)

Introduction to the MICTOR SB Interconnection System

(0.50 [.020] and 0.80 [.032] Centerline)

Product Facts

0.50 [.020] centerline

product: 105 dedicated

signal lines per inch within

one module (60 contacts

per module; modules on

20.0 [.788] centerlines)

0.80 [.032] centerline

product: 66.8 dedicated

signal lines per inch within

one module (40 contacts

per module; modules on

20.0 [.788] centerlines)

Surface mount family

designed for parallel board-

to-board, flex-to-board and

cable-to-board

configurations

Infrared and forced air

convection compatible

housing materials

Designed for 50 ohm

systems or 100 ohm systems

Connector housings

polarized for correct mating

Packaging styles available

in trays and pocket tape,

with both styles available

with or without vacuum dots

Recognized under the

Component Program of

Underwriter

Laboratories Inc.

File No. E111594

The MICTOR SB connector

family is based on the

Micro-Strip concept of two

rows of signal contacts

divided by a center power

ground plane.

Various mated heights are

available for parallel board-

to-board systems. The

MICTOR SB connector fam-

ily is available in 0.50 [.020]

and 0.80 [.032] centerlines.

They are available in sizes

ranging from 60 to 300 sig-

nal positions (in 60 position

increments) for the 0.50

[.020] centerline products

and from 40 to 200 signal

positions (in 40 position

increments) for the 0.80

[.032] centerline products.

There is a discrete ground

bus every 20.0 [.788] of the

connector length, which

can be assigned to either

power or ground in any

combination.

The housing material is

a liquid crystal polymer,

compatible with infrared

and forced air convection

operations.

The connector system

maintains impedance and

uses the solid ground bus

between the rows of signals

to provide low crosstalk and

excellent high-speed signal

characteristics.

1658012-2 bảng dữ liệu(PDF) 2 Page - Tyco Electronics

1658012-2 bảng dữ liệu(HTML) 2 Page - Tyco Electronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

bảng dữ liệu tải về

Link URL