RL78 Family

EEPROM Emulation Library Pack02 Ver.1.01

Release Note

R20UT2645EJ0100

Rev.1.00

Page 12 of 15

Mar 28, 2014

Chapter 8

Sample Program

The attached sample program (r_eel_sample_c.c) is provided to enable the usage method of the EEPROM Emulation

Library Pack02 to be easily confirmed on the QB-R5F100LE-TB boards with R5F100LEA (RL78/G13) as the target

microcontrollers. The sample program is just a reference example and the user program does not have to be created to

match the sample program. The sample program should be used as a simple program to confirm operation.

The link directive file (r_eel_sample_c.dr) for the sample program has a purpose to specify that a stack or data buffer

used by the sample program is not allocated to an area where allocation is prohibited

program, this file should also be embedded with the sample program.

Note2

Notes: 1. For details, refer to chapter 6.2 "Software Resource" in the user's manual.

2. The data in usage may be placed at an unintended area depending on how the environment in use or the

program is changed. After an execution module is generated, the map file and allocation state of programs or

data must be confirmed. For the definition method and allocation conditions of each code or data, refer to the

user's manual of the CubeSuite+.

8.1

Initial Settings of the Sample Program

The sample program operates with the following initial settings. When these settings need to be changed, modify the

sample program.

• CPU operating frequency: High-speed on-chip oscillator 32 MHz

• Voltage mode: Full-speed mode