L13 datasheet(10/42 Pages) RENESAS

10 / 42 page

QB-RL78L1C In-Circuit Emulator

CHAPTER 1

GENERAL

R20UT2703EJ0200

Rev.2.00

Page 10 of 42

Jan 31, 2014

(1)

TCN1, TCN2, TCN3

These are connectors for connecting a check pin adapter or emulation probe.

(2)

OSC1

This is a socket for mounting the oscillator.

(3)

CN6, TCN4

These are connectors for the shipment inspection. User does not need to use these connectors.

(4)

POWER (Red LED)

This is an LED that shows whether the power supply of the QB-RL78L1C is switched on.

LED State

QB-RL78L1C State

Lit

Power switch ON

Not lit

Power switch OFF or AC adapter not connected to QB-RL78L1C

Blinking

Internal error occurred (Contact an Renesas Electronics sales representative or

distributor)

(5)

TARGET (Green LED)

This is an LED that shows whether the power supply of the target system is switched on.

LED State

Target System State

Lit

Target system power supply ON

Not lit

Target system power supply OFF or target system not connected

(6)

Power switch

This is the power switch of the QB-RL78L1C.

It is OFF at shipment.

(7)

Cooling fun

This is the cooling fun of the QB-RL78L1C.

It works when the power supply of the QB-RL78L1C is switched on.

L13 bảng dữ liệu(PDF) 10 Page - Renesas Technology Corp

L13 bảng dữ liệu(HTML) 10 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42

bảng dữ liệu tải về

Link URL