L4988D datasheet(16/32 Pages) STMICROELECTRONICS

tên linh kiện	L4988D

Giải thích chi tiết về linh kiện	Low drop voltage regulator

PDF	32 Pages

Scroll/Zoom	100%

nhà sản xuất	STMICROELECTRONICS [STMicroelectronics]

Trang chủ	http://www.st.com

Logo

16 / 32 page

Application information

L4988

16/32

Doc ID 13617 Rev 6

Application information

Figure 24.

L4988 application schematic

Note:

The input capacitor Cs > 200nF is necessary for the smoothing of line disturbances. The

output capacitor C01 > 100nF is necessary for the stability of the regulation loop. In order to

damp output voltage oscillations during high load current surges, it is recommended to put

an additional electrolytic capacitor C02 > 10µF at the output pin.

3.1

Voltage regulator

Voltage regulator uses a p-channel mos transistor as a regulating element. With this

structure a very low dropout voltage at currents up to 200mA is obtained. The output voltage

is regulated up to transient input supply voltage of 40V. No functional interruption due to

over-voltage pulses is generated. A short circuit protection to GND is provided. The high

precision of the output voltage is obtained with a pre-trimmed reference voltage.

L4988D bảng dữ liệu(PDF) 16 Page - STMicroelectronics