PWR11XX 7/99 REV E

Page 3

ABSOLUTE MAXIMUM RATINGS

Output Short-Circuit Duration ................................................... Momentary

Internal Power Dissipation .............................................................. 750mW

Lead Soldering Temperature (10 seconds max) ............................ +300°C

PWR

11XX

Device Family

PWR Indicates DC/DC Converter

Model Number

Selected from Table of Electrical Characteristics

ORDERING INFORMATION

APPLICATION NOTE

UNBALANCED LOADS

Unbalanced loads may be used on dual output models with

either side providing up to its rated current. Output volt-

ages, by design, will track each other in an unbalanced state

within ±10% of one another.

OUTPUT NOISE

Output noise can be reduced to 30mVp-p, typically, by

adding a 10µF tantalum capacitor with an equivalent series

resistance (ESR) of less than 150m

Ω at 10kHz across each

output.