5-282

FAST AND LS TTL DATA

SN54/74LS160A

• SN54/74LS161A

SN54/74LS162A

• SN54/74LS163A

Symbol

Parameter

Limits

Unit

Test Conditions

Symbol

Parameter

Min

Typ

Max

Unit

Test Conditions

tWCP

Clock Pulse Width Low

25

ns

VCC = 5.0 V

tW

MR or SR Pulse Width

20

ns

VCC = 5.0 V

ts

Setup Time, other*

20

ns

VCC = 5.0 V

ts

Setup Time PE or SR

25

ns

VCC = 5.0 V

th

Hold Time, data

3

ns

CC = 5.0 V

th

Hold Time, other

0

ns

trec

Recovery Time MR to CP

15

ns

*CEP, CET or DATA

DEFINITION OF TERMS

SETUP TIME (ts) — is defined as the minimum time required

for the correct logic level to be present at the logic input prior to

the clock transition from LOW to HIGH in order to be recog-

nized and transferred to the outputs.

HOLD TIME (th) — is defined as the minimum time following

the clock transition from LOW to HIGH that the logic level must

be maintained at the input in order to ensure continued recog-

nition. A negative HOLD TIME indicates that the correct logic

level may be released prior to the clock transition from LOW to

HIGH and still be recognized.

RECOVERY TIME (trec) — is defined as the minimum time re-

quired between the end of the reset pulse and the clock transi-

tion from LOW to HIGH in order to recognize and transfer

HIGH Data to the Q outputs.

AC WAVEFORMS

Figure 1. Clock to Output Delays, Count

Frequency, and Clock Pulse Width

Figure 2. Master Reset to Output Delay, Master Reset

Pulse Width, and Master Reset Recovery Time

1.3 V

1.3 V

1.3 V

1.3 V

1.3 V

1.3 V

1.3 V

CP

Q

tW(H)

tW(L)

trec

tPHL

tPHL

tPLH

OTHER CONDITIONS:

PE = MR (SR) = H

CEP = CET = H

OTHER CONDITIONS:

PE = L

P0 = P1 = P2 = P3 = H

tW

Q0 ⋅ Q1 ⋅ Q2 ⋅ Q3

MR

CP