| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TSL2591 bảng dữ liệu(PDF) 18 Page - ams AG |
|
|
|||||||||||||||||||||||||||||
TSL2591 bảng dữ liệu(HTML) 18 Page - ams AG |
|
18 / 25 page ![]() TSL2591 – 18 Datasheet - Apr. 2013 - ams163.5 Figure TSL2591 - 17 shows a typical hardware application circuit. A 1-μF low-ESR decoupling capacitor should be placed as close as possible to the VDD pin. VBUS in this figure refers to the I2C bus voltage, which is equal to VDD. Figure TSL2591 – 17: Typical Application Hardware Circuit The I2C signals and the Interrupt are open-drain outputs and require pull-up resistors. The pull-up resistor (RP) value is a function of the I2C bus speed, the I2C bus voltage, and the capacitive load. The ams EVM running at 400 kbps, uses 1.5-kΩ resistors. A 10-kΩ pull-up resistor (RPI) can be used for the interrupt line. Application Information TSL2591 |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |