TSL267

HIGH-SENSITIVITY

IR LIGHT-TO-VOLTAGE CONVERTER

TAOS033E − SEPTEMBER 2007

6

r

r

Copyright E 2007, TAOS Inc.

The LUMENOLOGY r Company

www.taosinc.com

MECHANICAL DATA

The device is supplied in a visible light-blocking plastic three-lead through-hole sidelooker package (S).

PACKAGE S

PLASTIC SINGLE-IN-LINE SIDE-LOOKER PACKAGE

1.64

2.60

2.30

4.60

R 0.90

1.80

0.42

1

2

0.47 TYP

TOP VIEW

SIDE VIEW

FRONT VIEW

0.42

1.56

14.86 + 0.50

4.60

0.15

Note B

Lead Free

Available

Pb

NOTES: A. All linear dimensions are in millimeters; tolerance is ± 0.25 mm unless otherwise stated.

B. Dimension is to center of lens arc, which is located below the package face.

C. The integrated photodiode active area is round with a typical diameter of 0.75 mm and is typically located in the center of the lens

and 0.97 mm below the top of the lens surface.

D. Lead finish for TSL267: solder dipped, 63% Sn/37% Pb. Lead finish for TSL267−LF: solder dipped, 100% Sn..

E. This drawing is subject to change without notice.

Figure 7. Package S — Single-In-Line Side-Looker Package Configuration