TSL237

HIGH-SENSITIVITY

LIGHT-TO-FREQUENCY CONVERTER

TAOS052J − SEPTEMBER 2008

6

r

r

Copyright

E 2008, TAOS Inc.

The LUMENOLOGY

r Company

www.taosinc.com

APPLICATION INFORMATION

Measuring the Frequency

The choice of interface and measurement technique depends on the desired resolution and data-acquisition

rate. For maximum data-acquisition rate, period-measurement techniques are used.

Period measurement requires the use of a fast reference clock with available resolution directly related to the

reference-clock rate. The technique is employed to measure rapidly varying light levels or to make a fast

measurement of a constant light source.

Maximum resolution and accuracy may be obtained using frequency-measurement, pulse-accumulation,

or integration techniques. Frequency measurements provide the added benefit of averaging out random- or

high-frequency variations (jitter) resulting from noise in the light signal. Resolution is limited mainly by available

counter registers and allowable measurement time. Frequency measurement is well suited for slowly varying

or constant light levels and for reading average light levels over short periods of time. Integration, the

accumulation of pulses over a very long period of time, can be used to measure exposure — the amount of light

present in an area over a given time period.

PCB Pad Layout

Suggested PCB pad layout guidelines for the SM surface mount package are shown in Figure 10.

3.2

1.0

1.0

1.0

1.0

1.0

NOTES: A. All linear dimensions are in millimeters.

B. This drawing is subject to change without notice.

Figure 10. Suggested SM Package PCB Layout