» Shells: aluminum alloy plated with electroless nickel

» Electrical Inserts: Thermoplastics

» Strain Relief and Ferrule: aluminum alloy plated with

electroless nickel

» Set Screw: stainless steel

» Seals: fluorosilicone

MATERIAL

» Accomodates Cable O.D : 0.20”-0.32”

» Optimized with CarlisleIT Cable P/N

26463/1A042X-8(LD) (10Gb)

» Optimized with CarlisleIT Cable P/N

NF26GB100 (1Gb)

» Accommodates 26-22 gauge wire

» Accepts Eight M39029/58-360 contacts

CABLE & WIRE ACCOMODATION

Note: Above graphs illustrate the main ethernet test results of the CarlisleIT Octax™ connectors and cable 26463/1A042X-8(LD).

These charts were produced by using Fluke DTX 1800 test equipment with TIA/EIA-568 CAT 6A specification, 180 ft of cable, and 4

connectors. Drawings, test report, and other contact arrangements will be available upon request. Contacts are included with connector.

UHSOCTAX08S02

© Carlisle Interconnect Technologies, 2012. All trademarks, service marks and trade names are property of their respective holding companies. All Rights Reserved.

Rev. 062012-100