hybrids

All dimensions shown in decimal inches (mm). Specifications subject to change without notice.

For mounting instructions, additional specifications or other products, visit us online or contact the factory.

* Shield finish code — see Part Number Key.

Electrical specifications summarized in the table above are determined by measurements at 300 MHz in a matched 50 ohm system and are

independent of physical length and frequency with the exception of power. At jacket temperatures above 55°C, the power should be derated

linearly to 50% at 105°C and to 0 at 155°C.

Bandwidth Optimization

Coupling, Coupled Path (dB)

Unbalanced, Max. (dB), Coupled Path to Main Line

Insertion Loss Max. (dB)

Isolation, Min. (dB)

Directivity, Min. (dB)

VSWR, Max.

Power, Average (W)

Power, Peak (kW)

Phase Quadrature Error, Max. (°)

Dielectric Breakdown, Min. (V RMS)

Weight ounces (grams) per inch/mm

Narrow

3.00 ±0.15

0.3

0.2

30

27

1.1:1

500

2.5

±1

1000

0.15 (4,3)

Octave

2.70 ±0.15

1.1

0.2

30

27

1.1:1

500

2.5

±1

1000

0.11 (3,0)

• Drop-in, surface mount and flanged options

• Ready to install

• High power handling capability

• Low loss, low cost

• Aerospace and commercial heritage

Electrical Specification

Mechanical Specification

FA*1

KC*1

LC*1

FA*1

KC*2

LC*2

KC*1, LC*1

KC*2, LC*2

FA (Flanged)

KC (Round), Crossover & Non-Crossover

LC (Square), Crossover & Non-Crossover

Part Number

(see Part Number Key)