AMD

14

Am7996

Notes:

1. Parameters are measured at coax tap. In production test, parameters are measured across at 25

Ω load equivalent to the

coax tap.

2. For conditions shown as Min or Max, use the appropriate value specified under Operating Range for the applicable

device type.

°C ambient.

5. This threshold can be modified externally (see Figure 3).

6. Parameter not tested.

7. Tested on a 5 Mbps preamble (continuous 1010 pattern) measured between 20% and 80% points, test limits correlated to

10% and 90% data sheet limits shown.

8. Determined by Am7966 External Component Diagrams values for R4 and C1.

9. In production test, input signal applied thru transformer to DO

± inputs.

10. Figure 2 used for production testing of all parameters.

*Notes listed correspond to the respective references made in DC Characteristics and Switching Characteristics tables.