MP8104 datasheet(9/10 Pages) MPS

tên linh kiện	MP8104

Giải thích chi tiết về linh kiện	Ultra Low Power 1.8V, 400KHz Op Amp With Industry Standard Pin-Out

PDF	10 Pages

Scroll/Zoom	100%

nhà sản xuất	MPS [Monolithic Power Systems]

Trang chủ	http://www.monolithicpower.com

Logo

9 / 10 page

MP8104 – ULTRA LOW POWER, 1.8V, 400KHz OP AMP WITH INDUSTRY STANDARD PIN-OUT

MP8104 Rev. 1.01

www.MonolithicPower.com

2/28/2012

MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.

APPLICATION INFORMATION

Power Supply Bypassing

Regular supply bypassing techniques are

recommended. A 10µF capacitor in parallel with

a 0.1µF capacitor on both the positive and

negative supplies is ideal. For the best

performance, all bypassing capacitors should

be located as close to the op amp as possible

and all capacitors should be low ESL

(Equivalent Series Inductance) and low ESR

(Equivalent Series Resistance). Surface mount

ceramic capacitors are ideal.

TYPICAL APPLICATION CIRCUIT

OUTPUT1

OUTPUT2

200pF

MP8104

NPN

VCC/2

VCC

Notes:

1) The control voltage VIN is wide, 0 < VIN < VCC - 1V

2) The switch frequency can be changed by adjusting R and C.

VIN

Figure 3—Voltage Controlled Frequency Circuit

MP8104 bảng dữ liệu(PDF) 9 Page - Monolithic Power Systems