A prismatic battery pack for a wide

range of applications requesting

low base currents combined with

superimposed pulses. The LS 9 V

version yields good voltage readings

in a wide T range (-60°C to +85°C).

Benefits

l

High voltage, stable during most

of the application’s lifetime

l

Wide operating temperature

range

l

Low self-discharge rate

(less than 1 % per year of

storage at + 20°C)

l

Easy integration into compact

systems

Key features

l

Pack assembled from three

½ AA-sized (and UL-recognized)

cells connected in series

l

Component cells with stainless

steel container and hermetic

glass-to-metal sealing

l

Plastic sleeve for battery housing

l

Miniature snap-on terminals

l

Non-flammable electrolyte

l

Non-restricted for transport

Main applications

l

Memory back-up

l

Alarm and security devices

l

Smoke detectors

l

Alarm equipment

l

Industrial electronics

l

Medical equipment

September 2011

Pack construction

Primary lithium batteries

LS 9 V

High energy density

Battery pack

Pack designation

LS 9 V

Part number

C10-0046

Electrical characteristics

(typical values relative to cells stored for one year or less at + 30°C max.)

Nominal capacity

1.2 Ah

(at 1 mA, + 20°C, 6.0 V cut-off. The capacity restored by the battery pack

(1.0 mA)

varies according to current drain, temperature and cut-off)

Open circuit voltage (at + 20°C)

11.0 V

Nominal voltage

(at + 20°C and 0.1 mA)

10.8 V

Pulse capability: Typically up to

100 mA

(0.1 second pulses, drained every 2 mn at + 20°C from undischarged

cells with 10 µA base current, yield voltage readings above 3.0 V.

The readings may vary according to the pulse characteristics, the

temperature, and the cell’s previous history. Fitting the cell with a

capacitor may be recommended in severe conditions. Consult Saft)

Maximum recommended continuous current

35 mA

(Higher currents possible, consult Saft)

Storage

(recommended)

+ 30°C (+ 86°F) max

(for more severe conditions, consult Saft)

Operating temperature range

- 60°C/+85°C

(Operation above ambient T may lead to reduced capacity and

(- 76°F/+ 185°F)

lower voltage readings at the beginning of pulses. Consult Saft)

Typical weight

29 g (1 oz)

Li metal content

approx. 0.9 g

3

LS 14250

in series