| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MTP12P10 bảng dữ liệu(PDF) 4 Page - Motorola, Inc |
|
|
|||||||||||||||||||||||||||||
MTP12P10 bảng dữ liệu(HTML) 4 Page - Motorola, Inc |
|
4 / 6 page ![]() MTP12P10 4 Motorola TMOS Power MOSFET Transistor Device Data SAFE OPERATING AREA INFORMATION VDS, DRAIN–TO–SOURCE VOLTAGE (VOLTS) Figure 7. Maximum Rated Forward Biased Safe Operating Area VDS, DRAIN–TO–SOURCE VOLTAGE (VOLTS) Figure 8. Maximum Rated Switching Safe Operating Area 0 20 40 60 80 0 40 50 100 RDS(on) LIMIT PACKAGE LIMIT THERMAL LIMIT 10 VGS = 20 V SINGLE PULSE TC = 25°C 1 1 10 10 µs 1 ms 10 ms 30 10 100 0.1 ms MTM/MTP12P06 MTM/MTP12P10 20 10 30 50 70 90 MTM/MTP12P06 MTM/MTP12P10 dc FORWARD BIASED SAFE OPERATING AREA The FBSOA curves define the maximum drain–to–source voltage and drain current that a device can safely handle when it is forward biased, or when it is on, or being turned on. Because these curves include the limitations of simultaneous high voltage and high current, up to the rating of the device, they are especially useful to designers of linear systems. The curves are based on a case temperature of 25 °C and a maxi- mum junction temperature of 150 °C. Limitations for repetitive pulses at various case temperatures can be determined by using the thermal response curves. Motorola Application Note, AN569, “Transient Thermal Resistance–General Data and Its Use” provides detailed instructions. SWITCHING SAFE OPERATING AREA The switching safe operating area (SOA) of Figure 8 is the boundary that the load line may traverse without incurring damage to the MOSFET. The fundamental limits are the peak current, IDM and the breakdown voltage, V(BR)DSS. The switching SOA shown in Figure 8 is applicable for both turn– on and turn–off of the devices for switching times less than one microsecond. The power averaged over a complete switching cycle must be less than: TJ(max) – TC R θJC Figure 9. Thermal Response R θJC(t) = r(t) RθJC R θJC = 1.67°C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) – TC = P(pk) R θJC(t) P(pk) t1 t2 DUTY CYCLE, D = t1/t2 t, TIME (ms) 1 0.01 D = 0.5 0.05 0.01 SINGLE PULSE 0.01 0.02 0.03 0.02 0.05 0.1 0.2 0.3 0.5 0.02 0.05 0.1 0.2 0.5 1 2 5 10 20 50 100 200 500 1000 0.1 0.2 |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |