ADE7752ARRL datasheet(23/24 Pages) AD

tên linh kiện	ADE7752ARRL

Giải thích chi tiết về linh kiện	Polyphase Energy Metering IC with Pulse Output

PDF	24 Pages

Scroll/Zoom	100%

nhà sản xuất	AD [Analog Devices]

Trang chủ	http://www.analog.com

Logo

23 / 24 page

ADE7752/ADE7752A

Rev. C | Page 23 of 24

NEGATIVE POWER INFORMATION

The ADE7752 detects when the current and voltage channels of

any of the three phase inputs have a phase difference greater

than 90°: ϕA or ϕB or ϕ

> 90°. This mechanism can detect

wrong connection of the meter or generation of active energy.

The REVP pin output goes active high when negative power is

detected on any of the three phase inputs. If positive active

energy is detected on all the three phases, REVP pin output is low.

The REVP pin output changes state at the same time a pulse is

issued on CF. If several phases measure negative power, the

REVP pin output stays high until all the phases measure

positive power. If a phase has gone below the no load threshold,

REVP detection on this phase is disabled. REVP detection on

this phase resumes when the power returns out of no load

condition. See the No Load Threshold section.

ADE7752ARRL bảng dữ liệu(PDF) 23 Page - Analog Devices