MPC8548ECPXATJB datasheet(18/151 Pages) FREESCALE

18 / 151 page

MPC8548E PowerQUICC III Integrated Processor Hardware Specifications, Rev. 9

Freescale Semiconductor

Input Clocks

4.5

Platform to FIFO Restrictions

Note the following FIFO maximum speed restrictions based on platform speed.

For FIFO GMII mode:

FIFO TX/RX clock frequency

 platform clock frequency/4.2

For example, if the platform frequency is 533 MHz, the FIFO TX/RX clock frequency must be no more

than 127 MHz.

For FIFO encoded mode:

FIFO TX/RX clock frequency

 platform clock frequency/4.2

For example, if the platform frequency is 533 MHz, the FIFO TX/RX clock frequency must be no more

than 167 MHz.

4.6

Platform Frequency Requirements for PCI-Express and Serial

RapidIO

The CCB clock frequency must be considered for proper operation of the high-speed PCI-Express and

Serial RapidIO interfaces as described below.

For proper PCI Express operation, the CCB clock frequency must be greater than:

527 MHz

 (PCI-Express link width)

See MPC8548ERM, Rev. 2, PowerQUICC III Integrated Processor Family Reference Manual,

Section 18.1.3.2, “Link Width,” for PCI Express interface width details.

For proper serial RapidIO operation, the CCB clock frequency must be greater than:

(0.80)  (Serial RapidIO interface frequency) × (Serial RapidIO link width)

See MPC8548ERM, Rev. 2, PowerQUICC III Integrated Processor Family Reference Manual,

Section 17.4, “1x/4x LP-Serial Signal Descriptions,” for serial RapidIO interface width and frequency

details.

4.7

Other Input Clocks

For information on the input clocks of other functional blocks of the platform see the specific section of

this document.

MPC8548ECPXATJB bảng dữ liệu(PDF) 18 Page - Freescale Semiconductor, Inc