Application Notes

UMCC – Ultraminiature Coax Connector & Cable Assembly Series

Page 10

© Copyright 2007 by Tyco Electronics Corporation. All Rights Reserved.

TE LOGO and TYCO ELECTRONICS are trademarks.

MURATA is a trademark of Murata Manufacturing Company, Ltd. Murata Manufacturing Company, Ltd. is not affiliated with the UMCC product.

HIROSE is a trademark of Hirose Electric U.S.A. Hirose Electric U.S.A. is not affiliated with the UMCC product.

Other products, logos, and Company names mentioned herein maybe trademarks of their respective owners.

1-1773441-5_11/07_CCCE_PDF

Extraction Tool

PULLING TOOL

STEP 1

RECEPTACLE

STEP 2

2N MAX.

2N MAX.

PRINT CIRCUIT BOARD

RF COAX. CABLE

4N MAX.

Mating/Unmaking — Cable Plugs

1) To mate the connectors, insert the cable plug into the

SMT receptacle, making sure the cable plug is as vertical as

possible and the mating axis of both connectors are aligned.

Do not insert on an extreme angle.

2) To unmate the connectors, insert the end portion of the

extraction tool under the SMT receptacle connector flanges

and pull off vertically in the direction of the mating axis.

Permissible Load

Do not apply excessive load to the cable after the connectors

are mated. Please refer to the permissible loads indicated in

the figure to the right.

Part Number: 1775231-1

Dimensions are millimeters [inches] unless otherwise specified

Disclaimer

While Tyco Electronics Corporation and its affiliates referenced herein (“Tyco Electronics”) have made every reasonable effort to ensure

the accuracy of the information in this catalog, Tyco Electronics does not guarantee that it is error free, nor does Tyco Electronics make

any other representation, warranty or guarantee that the information is accurate, correct reliable or current.

Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice.

Tyco Electronics expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to,

any implied warranties of merchantability or fitness for a particular purpose. Tyco Electronics' only obligations are those in the

Tyco Electronics Standard Terms and Conditions of Sale, and in no case will Tyco Electronics be responsible for any incidental,

indirect, or consequential damages arising from the sale, resale, or misuse of its products. Users should independently evaluate the

suitability of, and test each product for, their application