TX53

Board highlights:

•

Highly integrated

•

Industrial temperature range (i.MX537 only)

•

Standard TX-DIMM pinout

•

as small as possible - only 31mm

•

3.3V I/O

The TX53 is a member of a module series, specially designed for Freescales

i.MX multimedia processors. TX modules are complete computers,

implemented on a board smaller than a credit card, and ready to be designed

into your embedded system. TX modules includes a Freescale® i.MX

processor, SDRAM and Flash memory. The integrated LCD-controller enables

direct connection of an LCD screen. The TX53 is specifically targeted at

embedded applications where size, high cpu-performance and cost are critical

factors.

Computer on module

•

Freescale® i.MX535, 1.2 GHz / i.MX537, 800 MHz

•

512 MByte/1GByte SDRAM (32bit) (up to 2GB on request)

•

DDR3-800

•

128 MByte NAND Flash memory

•

DIMM200-module (67,6mm x 31 mm x 3,6mm)

•

Industrial i.MX537 / Commercial i.MX535

•

Operating temperature range -20..70°C / -40°C..85°C

Processor

The i.MX53 family of processors represents Freescale's next generation of

advanced multimedia and power-efficient implementation of the ARM

Cortex™-A8 core. The i.MX53, prepares your end device for tomorrow’s smart

mobile technology today. The i.MX53 enables hours of full HD 1080p video

playback and an amazing Adobe® Flash® 10.1 experience. With core

processing speeds up to 1 GHz as well as a high level of integration, the

i.MX53 enables a great user experience at a lower retail

price point.

High Performance CPU : ARM Cortex-A8 up to 1GHz

•

OpenGL® ES 2.0 and OpenVG™ 1.1 hardware

accelerators

•

Multi-format HD1080p video decoder and

HD720p video encoder hardware engine

•

Dual display capable with multiple display options

including TFT LCD, LVDS, analog TV-formats

(composite, component, RGB) and standard VGA

•

Hardware accelerated image post-processing,

display quality enhancement, and video and

graphics combining

•

Two simultaneous camera inputs with hardware

pre-processing

•

Dual USB 2.0 Controllers (HS OTG, HS Host) with

integrated PHY

•

Two additional High-Speed USB 2.0 controllers

•

10/100 Ethernet controller with IEEE1588 time-

stamping

•

Wide array of serial interfaces including SDIO,

SPI, I2C, UART

•

Security solution supporting High Assurance

Boot, Cipher and random number generator

accelerators, and Tamper Detection

Standard TX-DIMM pinout:

•

4-wire UARTs (x3)

•

LCD

•

I2C / PWM

•

Serial Audio Interfaces (x2)

•

4-wire SD-Card/SDIO

High-Speed communication interfaces incl. onboard Ethernet PHY / on-chip

USB PHY allows direct use of connectors/magnetics on the baseboard without

the need for additional logic:

•

10/100 Mbps Ethernet

•

480 Mbps USB OTG (Host or Device)

•

480 Mbps USB Host

Additional interfaces like CAN, 2 UARTs and external memory interface are

available on TX53 specific pins. Some interfaces are multiplexed with other

functions.

Power Supply

The TX53 accepts an input voltage from various sources:

•

1-cell Li-Ion/Polymer (3.1V to 4.2V)

•

5.0V USB supply or AC wall adapter

•

3.3V

Read more in our TX-Guide:

www.karo-electronics.com/TX-Guide

Ka-Ro electronics GmbH - Pascalstr. 22, D-52076 Aachen, Germany - Tel.: +49 2408 1402-0 (FAX -10)

www.karo-electronics.de

CPU

SDRAM

Flash

TX53/1200/1024S/128F/LVDS

1.2GHz i.MX535

1024MB

128MB

-20°C..70°C

TX53/800/512S/128F/I

800MHz i.MX537

512MB

128MB

-40°C..85°C

TX53/800/512S/128F/LVDS/I

800MHz i.MX537

512MB

128MB

-40°C..85°C

Ordering Information

Order Number

Temp.