ADM812LART datasheet(5/12 Pages) AD

tên linh kiện	ADM812LART

Giải thích chi tiết về linh kiện	Microprocessor Supervisory Circuit in 4-Lead SOT-143 with DSP

PDF	12 Pages

Scroll/Zoom	100%

nhà sản xuất	AD [Analog Devices]

Trang chủ	http://www.analog.com

Logo

5 / 12 page

Data Sheet

ADM811/ADM812

Rev. G | Page 5 of 12

PIN CONFIGURATION AND FUNCTION DESCRIPTIONS

ADM811/

ADM812

TOP VIEW

(Not to Scale)

GND

RESET/RESET

VCC

Figure 3. Pin Configuration

Table 3. Pin Function Descriptions

Pin No.

Mnemonic

Description

GND

Ground Reference For All Signals, 0 V.

RESET (ADM811)

Active Low Logic Output. RESET remains low while VCC is below the reset threshold or when MR is low;

RESET then remains low for at least 140 ms (at least 300 ms for the ADM811-3T) after VCC rises above the

reset threshold.

RESET (ADM812)

Active High Logic Output. RESET remains high while VCC is below the reset threshold or when MR is low;

RESET then remains high for 240 ms (typical) after VCC rises above the reset threshold.

Manual Reset. This active low debounced input ignores input pulses of 100 ns or less (typical) and is

guaranteed to accept input pulses of greater than 10 µs. Leave floating when not used.

VCC

Monitored Supply Voltage of 2.5 V, 3 V, 3.3 V, or 5 V. A 0.1 µF decoupling capacitor between VCC and the

GND pin is recommended.

ADM812LART bảng dữ liệu(PDF) 5 Page - Analog Devices