| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
AD7477AWARMZ-RL bảng dữ liệu(PDF) 22 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
AD7477AWARMZ-RL bảng dữ liệu(HTML) 22 Page - Analog Devices |
|
22 / 28 page ![]() AD7476A/AD7477A/AD7478A Rev. F | Page 22 of 28 CS going low clocks out the first leading zero to be read in by the microcontroller or DSP. The remaining data is then clocked out by subsequent SCLK falling edges beginning with the second leading zero. Thus, the first falling clock edge on the serial clock has the first leading zero provided and also clocks out the second leading zero. For the AD7476A, the final bit in the data transfer is valid on the 16th falling edge, having been clocked out on the previous (15th) falling edge. In applications with a slower SCLK, it is possible to read in data on each SCLK rising edge. In this case, the first falling edge of SCLK clocks out the second leading zero, which can be read in the first rising edge. However, the first leading zero that was clocked out when CS went low will be missed, unless it was not read in the first falling edge. The 15th falling edge of SCLK clocks out the last bit and it can be read in the 15th rising SCLK edge. If CS goes low just after one SCLK falling edge has elapsed, CS clocks out the first leading zero as it did before, and it can be read in the SCLK rising edge. The next SCLK falling edge clocks out the second leading zero, and it can be read in the following rising edge. AD7478A IN A 12 SCLK CYCLE SERIAL INTERFACE For the AD7478A, if CS is brought high in the 12th rising edge after four leading zeros and eight bits of the conversion have been provided, the part can achieve a 1.2 MSPS throughput rate. For the AD7478A, the track-and-hold goes back into track in the 11th rising edge. In this case, a fSCLK = 20 MHz and a throughput of 1.2 MSPS give a cycle time of t2 + 10.5(1/fSCLK)+ tACQ = 833 ns With t2 = 10 ns min, this leaves tACQ to be 298 ns. This 298 ns satisfies the requirement of 225 ns for tACQ. From Figure 27, tACQ is comprised of 0.5 (1/fSCLK) + t8 + tQUIET where t8 = 36 ns maximum. This allows a value of 237 ns for tQUIET, satisfying the minimum requirement of 50 ns. SCLK t1 1 5 11 SDATA THREE-STATE DB7 DB6 DB0 ZERO ZERO ZERO 4 LEADING ZEROS 2 3 t2 t8 12 1/THROUGHPUT tACQ 10.5(1/ fSCLK) tCONVERT tQUIET B THREE-STATE CS 4 Z Figure 27. AD7478A in a 12 SCLK Cycle Serial Interface |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |