8

7. Mating/Un-mating

Mating Operation

Un-mating Operation

Header Lock

Friction Lock

Reinforced Lock

Click Feel

Lever

(1) Start by placing the connector against the

header lock at an angle. If the plug is not

started at an angle, it will cause damage

to the connector.

(1) Begin by lifting up on the front section of

the plug.

(3) Keep pressing down until a “click” feeling

is sensed. The connector is now fully

and properly mated.

(3) Once the rear, or reinforced lock, is released the plug will come free from the header

and complete the un-mating sequence.

(2) Then, in a slight, rotating

movement, push the front

section of the plug down.

(2) Continue to rotate it upwards

and release the friction lock

portion.

6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN

TEL: +81-45-620-3526 Fax: +81-45-591-3726

http://www.hirose.com

http://www.hirose-connectors.com

®

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.

The contents of this catalog are current as of date of 04/2013. Contents are subject to change without notice for the purpose of improvements.