Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Metal Film Resistors

F

fd

fD

h

l

A

P

45

320

Indication

Type

Part Numbers

Std. Qty.

(pcs.)

Metal Film R

EROS2GHO

2000

Dimensions (mm)

Dimensions (mm)

Dimensions (mm)

P

12.7±1.0

5 min.

h

0±2

12.7±0.3

9.0±0.5

t

0.7±0.2

3.85±0.70

3 max.

A

3.2±0.2

6.35±1.00

19.0

+1.0

fD

1.7

+0.2

F

5.0±0.5

4.0±0.2

fd

0.45±0.05

W

18.0±0.5

k

0 max.

–0.1

–0.5

Safety Precautions

1. Keep the rated power and ambient temperature within the specified derating curve.

* When positioning and mounting Metal Film Resistors (hereafter called the resistors), make allowance for the

effect of heat generated through close contact between the resistors and neighboring components and for the

temperature rise of adjacent heat-generating components.

2. If a transient load (heavy load in a short time) like a pulse is expected to be applied, check and evaluate the

operations of the resistors when installed in your products before use.

When applying pulses to the resistors, keep the pulse peak within the rated voltage.

3. When the resistors' protective coatings are chipped, flawed, or removed, the characteristics of the resistors may

be impaired. Take special care not to apply mechanical shock during automatic mounting or cause damage

during handling of the boards with the resistors mounted.

4. Ultrasonic cleaning may cut the lead wire due to resonance. Try and check it before use.

The following are precautions for individual products. Please also refer to the precautions common to Fixed Resistors

shown on page ER3 of this catalog.

● Radial Taping for small type

Feb. 2006

Discontinud