Evaluation Board User Guide

UG-138

Rev. A | Page 7 of 16

Log Data

The software can save the acquired data into an Excel or text file

by clicking the Log Data button, which opens the dialog box

shown in Figure 7 From this window, you can choose to log the

ADC, the Celsius value, or both, as well as set the logging

interval (see Figure 7).

Figure 9. Data Logging

Temperature Values

This section gives you an update of all the temperature limits

and the temperature reading of the part. These values are a

replica of the ADC values in the Set Temperature Limits

section, converted into degrees Celsius. The graph labeled

Temperature in Celsius displays the variation in time of the

high and low temperature limits as well as the current tempera-

ture in degrees Celsius.

Register Map

This section displays all the register values for the part. You can

read or write to any register by using the Read and Write

buttons (see Figure 8).

Easy Setup

The Easy Setup button restores all registers with default values.

Close

This button closes the current window and returns to the

selection window (see Figure 3).

Figure 10. Register Map