RX111 datasheet(49/110 Pages) RENESAS

49 / 110 page

R01DS0190EJ0100 Rev.1.00

Page 49 of 107

Jun 19, 2013

RX111 Group

5. Electrical Characteristics

Electrical Characteristics

5.1

Absolute Maximum Ratings

Caution: Permanent damage to the MCU may result if absolute maximum ratings are exceeded.

To preclude any malfunctions due to noise interference, insert capacitors of high frequency characteristics between the VCC and

VSS pins, between the AVCC0 and AVSS0 pins, between the VCC_USB and VSS_USB pins, and between the VREFH0 and

VREFL0 pins. Place capacitors of about 0.1

μF as close as possible to every power supply pin and use the shortest and heaviest

possible traces. Also, connect capacitors as stabilization capacitance.

Connect the VCL pin to a VSS pin via a 4.7 µF capacitor. The capacitor must be placed close to the pin.

Note 1. Ports 16, 17, A6, and B0 are 5 V tolerant.

Do not input signals or an I/O pull-up power supply while the device is not powered. The current injection that results from input

of such a signal or I/O pull-up may cause malfunction and the abnormal current that passes in the device at this time may cause

degradation of internal elements.

Note 2. The upper limit of operating temperature is 85°C or 105°C, depending on the product. For details, refer to 1.2 List of Products.

Note 1. Set VCC and VCC_USB to the same potential. Also, set VSS, AVSS0, and VSS_USB to the same potential.

Note 2. AVCC0 and VCC can be set individually within the operating range. For details, 30.7.10 Voltage Range of Analog Power Supply

Pins.

Table 5.1

Absolute Maximum Ratings

Conditions:

VSS = AVSS0 = VREFL0 = VSS_USB = 0 V

Item

Symbol

Value

Unit

Power supply voltage

VCC, VCC_USB

–0.3 to +4.6

Input voltage (except for ports for 5 V tolerant*1)

Vin

–0.3 to VCC +0.3

Input voltage (ports for 5 V tolerant*1)

Vin

–0.3 to +6.5

Reference power supply voltage

VREFH0

–0.3 to AVCC +0.3

Analog power supply voltage

AVCC0

–0.3 to +4.6

Analog input voltage

VAN

–0.3 to +4.6

Operating temperature*2

Topr

–0.3 to AVCC + 0.3

(when AN000 to AN004 and AN006 used)

–0.3 to VCC + 0.3

(when AN008 to AN015 used)

°C

Storage temperature

Tstg

–55 to +125

°C

Table 5.2

Recommended Operating Voltage Conditions

Item

Symbol

Value

Unit

Recommended operating voltage conditions

VCC, VCC_USB*1

1.8 to 3.6 (during no USB communication)

3.0 to 3.6 (during USB communication)

AVCC0*2

1.8 to 3.6

RX111 bảng dữ liệu(PDF) 49 Page - Renesas Technology Corp

RX111 bảng dữ liệu(HTML) 49 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL