| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
STM32F373VC bảng dữ liệu(PDF) 99 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32F373VC bảng dữ liệu(HTML) 99 Page - STMicroelectronics |
|
99 / 128 page ![]() STM32F37x Electrical characteristics Doc ID 022691 Rev 3 99/128 6.3.18 DAC electrical specifications Table 63. DAC characteristics Symbol Parameter Min Typ Max Unit Comments VDDA Analog supply voltage 2.4 - 3.6 V VREF+ Reference supply voltage 2.4 - 3.6 V VREF+ must always be below VDDA VSSA Ground 0 - 0 V RLOAD (1) Resistive load with buffer ON 5 - k RO (1) Impedance output with buffer OFF -- 15 k When the buffer is OFF, the Minimum resistive load between DAC_OUT and VSS to have a 1% accuracy is 1.5 M CLOAD (1) Capacitive load - - 50 pF Maximum capacitive load at DAC_OUT pin (when the buffer is ON). DAC_OUT min(1) Lower DAC_OUT voltage with buffer ON 0.2 - - V It gives the maximum output excursion of the DAC. It corresponds to 12-bit input code (0x0E0) to (0xF1C) at VREF+ = 3.6 V and (0x155) and (0xEAB) at VREF+ = 2.4 V DAC_OUT max(1) Higher DAC_OUT voltage with buffer ON -- VDDA – 0.2 V DAC_OUT min(1) Lower DAC_OUT voltage with buffer OFF -0.5 mV It gives the maximum output excursion of the DAC. DAC_OUT max(1) Higher DAC_OUT voltage with buffer OFF -VREF+ – 1LSB V IDDVREF+ (3) DAC DC current consumption in quiescent mode (Standby mode) - 220 µA With no load, worst code (0xF1C) at VREF+ = 3.6 V in terms of DC consumption on the inputs IDDA (3) DAC DC current consumption in quiescent mode(2) - 380 µA With no load, middle code (0x800) on the inputs - 480 µA With no load, worst code (0xF1C) at VREF+ = 3.6 V in terms of DC consumption on the inputs DNL(3) Differential non linearity Difference between two consecutive code-1LSB) - ±0.5 LSB Given for the DAC in 10-bit configuration -±2 LSB Given for the DAC in 12-bit configuration INL(3) Integral non linearity (difference between measured value at Code i and the value at Code i on a line drawn between Code 0 and last Code 1023) -- ±1 LSB Given for the DAC in 10-bit configuration -- ±4 LSB Given for the DAC in 12-bit configuration |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |