TL072, TL072A, TL072B

Absolute maximum ratings and operating conditions

Doc ID 2298 Rev 7

3/16

2

Absolute maximum ratings and operating conditions

Table 1.

Absolute maximum ratings

Symbol

Parameter

TL072I, AI, BI

TL072C, AC,

BC

Unit

1.

All voltage values, except differential voltage, are with respect to the zero reference level (ground) of the

CC

±18

V

2.

The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 volts,

whichever is less.

±15

V

3.

Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.

±30

V

SO-8

DIP8

4.

Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous short-

circuits on all amplifiers.

125

85

°C/W

Thermal resistance junction to case (4)

SO-8

DIP8

40

41

°C/W

5.

The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be

limited to ensure that the dissipation rating is not exceeded.

Infinite

Storage temperature range

-65 to +150

°C

ESD

6.

Human body model: 100 pF discharged through a 1.5 k

Ω resistor between two pins of the device, done for

all couples of pin combinations with other pins floating.

1kV

7.

Machine model: a 200 pF cap is charged to the specified voltage, then discharged directly between two

pins of the device with no external series resistor (internal resistor < 5

Ω). This is done for all couples of pin

combinations with other pins floating.

200

V

8.

Charged device model: all pins plus package are charged together to the specified voltage and then

discharged directly to the ground.

1.5

kV

Table 2.

Operating conditions

Symbol

Parameter

TL072I, AI, BI

TL072C, AC,

BC

Unit

Supply voltage

6 to 36

V

Operating free-air temperature range

-40 to +105

0 to +70

°C