PIC16LC712 datasheet(78/106 Pages) MICROCHIP

78 / 106 page

PIC16C712/716

DS41106C-page 78

 1999-2013 Microchip Technology Inc.

Output Low Voltage

D080

VOL

I/O ports

——

0.6

IOL = 8.5 mA, VDD = 4.5V,

-40

C to +85C

——

0.6

IOL = 7.0 mA, VDD = 4.5V,

-40

C to +125C

D083

OSC2/CLKOUT

(RC Osc mode)

——

0.6

IOL = 1.6 mA, VDD = 4.5V,

-40

C to +85C

——

0.6

IOL = 1.2 mA, VDD = 4.5V,

-40

C to +125C

Output High Voltage

D090

VOH

I/O ports (Note 3)

VDD-0.7

——

IOH = -3.0 mA, VDD = 4.5V,

-40

C to +85C

VDD-0.7

——

IOH = -2.5 mA, VDD = 4.5V,

-40

C to +125C

D092

OSC2/CLKOUT (RC Osc

mode)

VDD-0.7

——

IOH = -1.3 mA, VDD = 4.5V,

-40

C to +85C

VDD-0.7

——

IOH = -1.0 mA, VDD = 4.5V,

-40

C to +125C

D150*

VOD

Open-Drain High Voltage

——

8.5

RA4 pin

Capacitive Loading Specs on

Output Pins

D100

COSC2 OSC2 pin

——

In XT, HS and LP modes when

external clock is used to drive

OSC1.

D101

CIO

All I/O pins and OSC2 (in RC

mode)

——

DC CHARACTERISTICS

Standard Operating Conditions (unless otherwise stated)

Operating temperature

0°C

 TA 

+70°C

for commercial

-40°C

 TA 

+85°C

for industrial

-40°C

 TA  +125°C for extended

Operating voltage VDD range as described in DC spec Section 12.1

“DC Characteristics: PIC16C712/716-04 (Commercial, Industrial,

Extended) PIC16C712/716-20 (Commercial, Industrial,

Extended)” and Section 12.2 “DC Characteristics: PIC16LC712/

716-04 (Commercial, Industrial)”

Param

No.

Sym.

Characteristic

Min.

Typ†

Max.

Units

Conditions

These parameters are characterized but not tested.

†

Data in “Typ” column is at 5V, 25

C unless otherwise stated. These parameters are for design guidance only

and are not tested.

Note 1: In RC Oscillator mode, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that the PIC

MCU be driven with external clock in RC mode.

2: The leakage current on the MCLR/VPP pin is strongly dependent on the applied voltage level. The specified

levels represent normal operating conditions. Higher leakage current may be measured at different input

voltages.

3: Negative current is defined as current sourced by the pin.

PIC16LC712 bảng dữ liệu(PDF) 78 Page - Microchip Technology

PIC16LC712 bảng dữ liệu(HTML) 78 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL