MCP102/103/121/131

DS21906C-page 2

 2004-2013 Microchip Technology Inc.

1.0

ELECTRICAL

CHARACTERISTICS

Absolute Maximum Ratings†

Output current (RST) . . . . . . . . . . . . . . . . . . . . . . . . . .10 mA

Storage temperature . . . . . . . . . . . . . . . . . . -65°C to + 150°C

Ambient temp. with power applied . . . . . . . -40°C to + 125°C

Maximum Junction temp. with power applied . . . . . . . . 150°C

ESD protection on all pins

2kV

† Notice: Stresses above those listed under “Maximum

Ratings” may cause permanent damage to the device. This is

a stress rating only and functional operation of the device at

those or any other conditions above those indicated in the

operational listings of this specification is not implied.

Exposure to maximum rating conditions for extended periods

may affect device reliability.

DC CHARACTERISTICS

Parameters

Sym

Min

Typ

Max

Units

Conditions

Operating Voltage Range

1.0

—

5.5

V

1.0

—

V

Operating Current

MCP102,

MCP103,

—

< 1

1.75

µA

MCP121

—

—

20.0

µA

MCP131

—< 1

1.75

µA

——

75

µA

—

—

90

µA

(Note 4)

Note

1:

Trip point is ±1.5% from typical value.

2:

Trip point is ±2.5% from typical value.

3:

RST output is forced low. There is a current through the internal pull-up resistor.

4:

This includes the current through the internal pull-up resistor and the reset power-up timer.

5:

gramming™ (ICSP™) (see device-specific programming specifications for voltage requirements). This specification

limited to 2 mA and it is recommended that the device operational temperature be maintained between 0°C to 70°C

(+25°C preferred). For additional information, please refer to Figure 2-33.

6:

This parameter is established by characterization and not 100% tested.