TECHNICAL ASSISTANCE

GENERAL SPECIFICATIONS:

The values listed below are general specs applying for PRECI-DIP DIL sockets. Please see individual catalog page for additional

and product specific technical data.

Operating temperature range

-55 ... +125 °C

Climatic category (IEC)

55/125/21

Operating humidity range

annual mean 75 %

Max working voltage

100 VRMS/150 VDC

PRECI-DIP sockets are recognized by Underwriters Laboratories Inc. and listed under "Connectors for Use in Data, Signal,

Control and Power Applications", File Nr. E174442.

MECHANICAL CHARACTERISTICS:

Clip retention

Min. 40 N (no displacement under axial force applied)

Contact (sleeve / clip) retention

Min. 3.3 N acc. to MIL-DTL-83734, pt 4.6.4.2

ELECTRICAL CHARACTERISTICS:

Insulation resistance between any two adjacent contacts

Min. 10'000 M at 500 V AC

Capacitance between any two adjacent contacts

Max. 1 pF

Air and creepage distances between any two adjacent contacts

Min. 0.6 mm (Min. 0.2 mm FOR SHRINK-DIP SOCKETS)

ENVIRONMENTAL CHARACTERISTICS:

The sockets withstand the following environmental tests without mechanical and electrical defects:

- Dry heat steady state IEC 60512-11-9.11i / 60068-2-2.Bb: 125 °C, 16h

- Damp heat cyclic IEC 60512-11-12.11m / 60068-2-30.Db: 25/55 °C, 90 – 100 %rH, 1 cycle of 24 h

- Cold steady state IEC 60512-11-10.11j / 60068-2-1.A: -55 °C, 2 h

- Thermal shock IEC 60512-11-4.11d / 60068-2-14.Na: -55/125 °C, 5 cycles 30 min

- Sinusoidal vibrations IEC 60512-6-4.6d / 60068-2-6.Fc: 10 to 500 Hz, 10 g, 1 octave/min, 10 cycles for each axis

- Shock IEC 60512-6-3.6c / 60068-2-27.Ea: 50 g, 11 ms, 3 shocks in three axis

During the above two tests no contact interruption >50 ns does appear.

- Solderability J-STD-002A, Test A, 245°C, 5 s solder alloy SnAg3.8Cu0.7

- Resistance to soldering heat J-STD-0020C, 260°C, 20 s

- Moisture sensitivity J-STD-020C level 1

- Resistance to corrosion :

1) Salt spray test IEC 60068-2-11.Ka: 48 h

2) Sulfur dioxide (SO2) test IEC 60068-2-42 Kc: 96 h at 25 ppm SO2, 25 °C, 75 %rH

3) Hydrogen sulfide (H2S) test IEC 60068-2-43 Kd: 96 h at 12 ppm H2S, 25 °C, 75 %rH

SOLDERLESS COMPLIANT PRESS-FIT CHARACTERISTICS:

PRESS-FIT CHARACTERISTICS MEASURED ACC. TO IEC 60352-5

- Press-in force: 90 N max. (at min. hole dia.) / 65 N typ.

- Push-out force: 30 N min. (at max. hole dia.) / 50 N typ.

- Push-out 3rd cycle: 20 N min. (at max. hole dia.)

PCB HOLE DIMENSIONS

- 2.54 mm grid: Finished hole Ø: 1 + 0.09/-0.06 mm | Drilled hole Ø: 1.15 ± 0.02 mm

PRECI-DIP SA

Rue Saint-Henri 11

P.P.Box 834

CH-2800 Delémont / Switzerland

PHONE

+41 (0)32 421 04 00

FAX

+41 (0)32 421 04 01

E-MAIL

sales@precidip.com

www.precidip.com