W25Q128FVTIP datasheet(39/97 Pages) WINBOND

39 / 97 page

W25Q128FV

Publication Release Date: October 01, 2012

- 38 -

Revision D

8.2.10 Fast Read Dual I/O (BBh)

The Fast Read Dual I/O (BBh) instruction allows for improved random access while maintaining two IO

pins, IO0 and IO1. It is similar to the Fast Read Dual Output (3Bh) instruction but with the capability to input

the Address bits (A23-0) two bits per clock. This reduced instruction overhead may allow for code

execution (XIP) directly from the Dual SPI in some applications.

Fast Read Dual I/O with “Continuous Read Mode”

The Fast Read Dual I/O instruction can further reduce instruction overhead through setting the

“Continuous Read Mode” bits (M7-0) after the input Address bits (A23-0), as shown in Figure 22a. The

upper nibble of the (M7-4) controls the length of the next Fast Read Dual I/O instruction through the

inclusion or exclusion of the first byte instruction code. The lower nibble bits of the (M3-0) are don’t care

(“x”). However, the IO pins should be high-impedance prior to the falling edge of the first data out clock.

If the “Continuous Read Mode” bits M5-4 = (1,0), then the next Fast Read Dual I/O instruction (after /CS is

raised and then lowered) does not require the BBh instruction code, as shown in Figure 22b. This reduces

the instruction sequence by eight clocks and allows the Read address to be immediately entered after /CS

is asserted low. If the “Continuous Read Mode” bits M5-4 do not equal to (1,0), the next instruction (after

/CS is raised and then lowered) requires the first byte instruction code, thus returning to normal operation.

It is recommended to input FFFFh on IO0 for the next instruction (16 clocks), to ensure M4 = 1 and return

the device to normal operation.

/CS

CLK

(IO

Mode 0

Mode 3

Instruction (BBh)

/CS

CLK

(IO

IOs switch from

Input to Output

A23-16

A15-8

A7-0

M7-0

Byte 1

Byte 2

Byte 3

Byte 4

= MSB

Figure 22a. Fast Read Dual I/O Instruction (Initial instruction or previous M5-4

≠ 10, SPI Mode only)

W25Q128FVTIP bảng dữ liệu(PDF) 39 Page - Winbond

W25Q128FVTIP bảng dữ liệu(HTML) 39 Page - Winbond

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97

bảng dữ liệu tải về

Link URL