| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
L6482 bảng dữ liệu(PDF) 45 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
L6482 bảng dữ liệu(HTML) 45 Page - STMicroelectronics |
|
45 / 73 page ![]() L6482 Programming manual Doc ID 023768 Rev 2 45/73 with the step mode selected in the STEP_MODE register in order to avoid a wrong microstep value generation (Section 9.1.17); otherwise the resulting microstep sequence is incorrect. Any attempt to write the register when the motor is running causes the command to be ignored and the NOTPERF_CMD flag to rise (Section 9.1.21). 9.1.3 MARK The MARK register contains an absolute position called MARK, according to the selected step mode; the stored value unit is equal to the selected step mode (full, half, quarter, etc.). It is in 2's complement format and it ranges from -221 to +221-1. 9.1.4 SPEED The SPEED register contains the current motor speed, expressed in step/tick (format unsigned fixed point 0.28). In order to convert the SPEED value in step/s, the following formula can be used: Equation 1 where SPEED is the integer number stored in the register and tick is 250 ns. The available range is from 0 to 15625 step/s with a resolution of 0.015 step/s. Note: The range effectively available to the user is limited by the MAX_SPEED parameter. Any attempt to write the register causes the command to be ignored and the NOTPERF_CMD flag to rise (Section 9.1.21). 9.1.5 ACC The ACC register contains the speed profile acceleration expressed in step/tick2 (format unsigned fixed point 0.40). In order to convert the ACC value in step/s2, the following formula can be used: Equation 2 where ACC is the integer number stored in the register and tick is 250 ns. The available range is from 14.55 to 59590 step/s2 with a resolution of 14.55 step/s2. When the ACC value is set to 0xFFF, the device works in infinite acceleration mode. Any attempt to write to the register when the motor is running causes the command to be ignored and the NOTPERF_CMD flag to rise (Section 9.1.21). step/s [] SPEED 2 28 – ⋅ tick ---------------------------------------- = step/s 2 [] ACC 2 40 – ⋅ tick 2 ------------------------------- = |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |