| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
ACT8600 bảng dữ liệu(PDF) 2 Page - Aeroflex Circuit Technology |
|
|
|||||||||||||||||||||||||||||
ACT8600 bảng dữ liệu(HTML) 2 Page - Aeroflex Circuit Technology |
|
2 / 5 page ![]() Aeroflex Circuit Technology 2 ACT8600 REV A 9/16/99 Plainview NY (516) 694-6700 Absolute Maximum Ratings Parameter Range Units Power Dissipation (PD) 20 W Operating (Junction) Temperature Range -55 to +150 °C Lead Temperature (soldering, 10 sec) 300 °C Storage Temperature Range -65 to +150 °C Input-Output Voltage Differential 40 V Thermal Resistance (junction to case ΘJC) 5 °C/W ESD Rating 2 KV NOTICE: Stresses above those listed under "Absolute Maximums Rating" may cause permanent damage to the device. These are stress rating only; functional operation beyond the "Operation Conditions" is not recommended and extended exposure beyond the "Operation Conditions" may effect device reliability. Recommended Operating Conditions Parameter Range Units Output Voltage Range Positive Voltage Regulator Negative Voltage Regulator 1.2 to 37 -1.2 to -37 V dc V dc Ambient Operating Temperature Range -55 to +125 °C Input Voltage Range Positive Voltage Regulator Negative Voltage Regulator 4.25 to 41.25 -4.25 to -41.25 V dc V dc Positive Regulator Electrical Performance Characteristics (TA = -55°C to +125°C, IL = 8mA, Unless otherwise specified) Parameter Sym Conditions Min Max Units Reference Voltage VREF VDIF = 3.0V, TA = + 25°C 1.2 1.3 V VDIF = 3.3V 1.2 1.3 V VDIF = 40V 1.2 1.3 V Line Regulation RLINE 3.0V < VDIF < 40V, VOUT = VREF, TA = + 25°C - ±9 mV 3.3V < VDIF < 40V, VOUT = VREF - ±23 mV Load Regulation 1/ RLOAD VDIF = 3.0V, 10mA < IL < 1.5A, TA = + 25°C - ±15 mV VDIF = 3.3V, 10mA < IL < 1.5A - ±15 mV VDIF = 40V, 10mA < IL < 300mA, TA = + 25°C - ±15 mV VDIF = 40V, 10mA < IL < 195mA - ±15 mV Thermal Regulation VRTH VIN = +14.6V, IL = 300mA, t = 20ms, PD = 20W, TA = + 25°C - ±16 mV Ripple Rejection RN f = 120Hz, CADJ = 10µF, VOUT = VREF 2/ 66 - dB Adjustment Pin Current IADJ VDIF = 3.0V, TA = + 25°C - 100 µA VDIF = 3.3V - 100 µA VDIF = 40V - 100 µA Adjustment Pin Current Change ∆IADJ VDIF = 3.0V, 10mA < IL < 1.5A, TA = + 25°C - ±5 µA VDIF = 3.3V, 10mA < IL < 1.5A - ±5 µA VDIF = 40V, 10mA < IL < 300mA, TA = + 25°C - ±5 µA VDIF = 40V, 10mA < IL < 195mA - ±5 µA |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |